xeru
Back to Instructions

⚒️ HWID Spoofer Setup Guide

Follow these steps carefully to set up HWID Spoofer successfully.

Important Information

Temp Spoofer: Temporary hardware ID changes that reset after reboot. Includes trace cleaner. Perfect for temporary needs.

Permanent Spoofer: Permanent hardware ID changes that persist after reboot. Lifetime version includes trace cleaner.

Note: For COD/BO7, you must enable Hyper-V in the loader settings.

1Download Requirements

Loader Download

Download the main loader file:

Download Loader

Required Software

Install these required components before running the spoofer:

WinRARDirectXVC++ RedistributableWindows Defender

2Disable Security Software

IMPORTANT: Disable all antivirus and security software before running the spoofer:

  • • Windows Defender
  • • Third-party antivirus (Norton, McAfee, Avast, etc.)
  • • Windows Firewall
  • • Real-time protection
Warning: Security software will interfere with the spoofer operation and may cause failures.

3Run the Spoofer

  1. 1. Right-click on the spoofer executable
  2. 2. Select "Run as Administrator"
  3. 3. If prompted by Windows SmartScreen, click "More info" then "Run anyway"
  4. 4. Follow the on-screen instructions in the spoofer interface
  5. 5. For Temp Spoofer: Changes will reset after reboot
  6. 6. For Permanent Spoofer: Changes persist after reboot

4Verify Your Spoofed HWID

Use the built-in HWID checker to verify your changes:

  • • Check Storage Device IDs
  • • Verify Network Adapter changes
  • • Confirm Processor information
  • • Review System Serial Numbers
  • • Check Windows Licensing
All hardware identifiers should show new randomized values after spoofing.

⚠Troubleshooting

Spoofer not working or failing

  • Make sure ALL antivirus software is disabled
  • Run as Administrator (required)
  • Disable Windows Defender Real-time Protection
  • Close all games before running spoofer
  • Restart computer and try again

Changes not persisting (Permanent Spoofer)

  • Ensure you're using the Permanent Spoofer, not Temp
  • Run the spoofer again as Administrator
  • Check if any system restore or protection is enabled
  • Verify changes using the HWID Checker tool

COD/BO7 specific issues

  • Enable Hyper-V option in the loader settings (required for COD/BO7)
  • Restart computer after enabling Hyper-V
  • Run spoofer before launching the game
  • Make sure game anti-cheat is not detecting old HWID

Trace cleaner not working

  • Trace cleaner is included with Temp Spoofer and Permanent Spoofer Lifetime
  • Close all games and applications
  • Run the cleaner as Administrator
  • Wait for the process to complete (may take 2-3 minutes)

Need Help?

Join our Discord community for 24/7 support and updates

Join Discord Support